Add states and LEDs

arduino/arduino.ino

@@ -17,11 +17,22 @@ int motor_pin4 = 11; // Orange - 28BYJ48 pin 4
 // Motor variables
 int motor_speed = 1200;
 int motor_count = 0;
-int motor_count_max = 256;
+int motor_count_max = 64;
 int motor_lookup[8] = {B01000, B01100, B00100, B00110, B00010, B00011, B00001, B01001};
+uint32_t green_led_color = carrier.leds.Color(0,255,0);
+
+
+enum state {
+  STATE_CONNECTING,
+  STATE_LOGGED_OUT,
+  STATE_LOGGED_IN,
+  STATE_INPUT_PASSCODE,
+};
+enum state current_state;
 
 void setup(void)
 {
+  current_state = STATE_CONNECTING; 
 	Serial.begin(9600);
 
 	Serial.println("Started");
@@ -58,15 +69,28 @@ void setup(void)
 
 	carrier.display.fillScreen(0x000);
 
-	// Pinouts for motor
+  current_state = STATE_LOGGED_OUT;
+  carrier.display.setCursor(15, 100);
+	carrier.display.setTextSize(2);
+  carrier.display.print("Press Green Button");
+  carrier.leds.begin();
+  carrier.leds.fill(green_led_color, 2, 1);
+  carrier.leds.setBrightness(5);
+  carrier.leds.show();
+
+  carrier.Buttons.begin();
+	// Pinouts for motor - DO NOT ADD CODE AFTER THIS
 	pinMode(motor_pin1, OUTPUT);
 	pinMode(motor_pin2, OUTPUT);
 	pinMode(motor_pin3, OUTPUT);
 	pinMode(motor_pin4, OUTPUT);
+  //do NOT add code after this. DON'T DO IT.
 }
 
 void loop(void)
 {
+  carrier.Buttons.update();
+  
 	// Rotate motor if needed
 	if (motor_count) {
 		motor_clockwise();
@@ -86,8 +110,26 @@ void loop(void)
 			motor_count = motor_count_max;
 		}
 	}
+
+  switch (current_state) {
+    case STATE_LOGGED_OUT:
+      if(carrier.Buttons.onTouchDown(TOUCH2)) {
+        current_state = INPUT_PASSCODE;
+      }
+      break;
+
+    default:
+      break;
+  };
+
 }
 
+
+
+
+
+
+//motorgøgl, pls dont touch
 void motor_clockwise()
 {
 	for (int i = 7; i >= 0; i--) {